Appearance: light yellow to light brown crystalline solid. Melting point: 153-157 °C (lit.) Boiling point: 312.16°C (rough estimate) Relative density (water = 1): 1.1405 (rough estimate) Assay: ≥97% Uses: Used in oil desulfurization research.
Appearance: Liquid. Melting point: 154 °C Boiling point: 438.3±55.0 °C (Predicted) Relative density (water = 1): 1.13±0.1 g/cm3 (Predicted) Assay: ≥98% Uses: It is an important intermediate.
Appearance: white powder. Boiling point: 397.7ºC at 760 mmHg Relative density (water = 1): 0.939g/cm3 Assay: ≥95% Uses: It is an important intermediate.
Appearance: light yellow oily liquid. Melting point: 28-30 (lit.) Boiling point: 150 °C/5 mmHg (lit.) Relative density (water = 1): 0.937 Assay: ≥97% Uses: can be used as organophosphorus pesticide intermediates.
Imidacloprid is a highly effective insecticide that falls under the neonicotinoid class of chemicals. It was first introduced in the market in the 1990s and has since become a popular choice among farmers, gardeners, and pest control professionals.
Thiostrepton is a potent antibiotic derived from the fermentation products of certain strains of the Actinomycete bacteria. It belongs to the thiopeptide class of antibiotics and has gained recognition for its remarkable efficacy against a wide range of Gram-positive bacteria, including MRSA (methicillin-resistant Staphylococcus aureus).
Deltamethrin, a pyrethroid insecticide, is an essential tool in the world of pest control. It is widely appreciated for its efficacy in targeting and eliminating a broad spectrum of pests. Since its development, Deltamethrin has become one of the most widely used insecticides globally. This product description aims to provide detailed information about Deltamethrin's characteristics, applications.
In addition to the characteristics of water-based environmental protection, good damping performance and good construction performance, it can also maintain strong adhesion to steel plates, aluminum and other substrates for a long time under complex climatic conditions, high-speed movement, super vibration, high-speed water erosion and other environments.
Good damping performance, with excellent damping performance in a wide temperature range; The construction performance is good, and the wet film is 3mm and does not sag.It is widely used in the inner surface of ordinary locomotives, subways and other cars and the outer surface of the underframe; It can also be used in construction venues, ships and other fields.
In addition to good chipping, impact and corrosion resistance, the adhesion is also particularly good. It is specially used for the bottom of the armored body, fenders and other parts to prevent the body damage caused by the impact of gravel, mud and sand during the operation of the armored vehicle.
The chassis is anti-corrosion, anti-stone chipping, shockproof, heat and fuel saving, sound insulation and noise reduction, and anti-dragging. It can be sprayed on exposed parts such as vehicle chassis, wheel hubs, fuel tanks, car bottom panels, and trunks.
The coating film has high strength, especially high tensile strength and bending strength, and good resistance to chipping, impact and corrosion. It is specially used on the bottom of the car body, fenders and other parts to prevent damage to the body due to the impact of gravel, sediment, etc. during operation.
The coating has a thickness greater than 7 mm but less than or equal to 45 mm, with a granular surface texture, low density, low thermal conductivity, and a fire resistance rating of at least 2 hours. Its fire-resistant performance is stable, and it provides effective, long-term protection with low cost.
Direct spraying and plastering application, fast drying and curing. The coating is lightweight, firmly bonded, has high strength, and has excellent aging resistance and waterproof performance. It is mainly suitable for fire prevention of highway tunnels and railway tunnels, as well as fire protection needs of petrochemical projects, high-rise buildings, steel structures and underground garages.
Good adhesion, durability and water resistance to steel substrates. It is used for the fire protection of bare steel structures with indoor fire resistance limit less than 2 h (or close to 2 hours) in airports, power plants, petrochemicals, stadiums, commercial plazas, industrial factories and mines, high-rise buildings, etc.
It has superior bond strength, good weather resistance, good water resistance, and good leveling. This type of fireproof coating is used in various light steel structures, grids, etc. for fire protection.
Related Search
CATEGORIES
Sign In
Username :
Password :