FRP Filament wound pipe can resist long-term erosion by various acids, alkalis, salts, organic solvents, as well as chemical media such as seawater and sewage. This FRP Pipes with different performance can be selected based on different media types and usage temperatures.

Appearance: colorless liquid. Melting point: -129.28 °c Boiling point: 63°C (lit.) Relative density (water = 1): 0.829 g/mL at 20 °C (lit.) Solubility: miscible with most organic solvents, slightly soluble in water. Assay: ≥99%     Uses: Used in the manufacture of intermediates and polymers, e.g. for the production of 1,2-butanediol.

Appearance: white crystal. Melting point: 63-65 °c Boiling point: 226.1 °C [at 101 325 Pa] Relative density (water = 1): 1.188 [at 20°C] Solubility: soluble in ethanol, difficult to dissolve in water, ether. Assay: ≥98%     Uses: can be used in organic synthesis, pharmaceuticals, and can also be used as plasticizers.

Physical and chemical properties: Appearance: transparent liquid. Melting point: -83 °C (lit.) Boiling point: 77 °C (lit.) Relative density (water = 1): 0.806g/mLat 20°C Solubility: soluble in acetone, benzene, carbon tetrachloride, ether, ethanol and other organic solvents. Slightly soluble in water. Assay: ≥99%     Uses: It is an important raw material for organic synthesis.

Appearance: colorless to light yellow liquid. Melting point: 24 °c Boiling point: 256°C at 760 mmHg Relative density (water = 1): 1.166g/cm3 Solubility: soluble in ethanol, ether and other organic solvents, slightly soluble in water and glycerol. Assay: ≥99%     Uses: Used to blend grapes, cherries, strawberries, watermelon, citrus and other food flavors and wine flavors.

Appearance: white solid.     Boiling point: 170-175°C20mm Hg(lit.) Relative density (water = 1): 1.07g/mLat 25°C (lit.)     Assay: ≥98%     Uses: It is an important intermediate.

Appearance: white to yellow crystalline powder.     Boiling point: 727.8°C at 760 mmHg Assay: ≥97%     Uses: Sodium gluproheptanoate can dissolve iron and other metal oxides, rust removal and descaling.

Appearance: white crystalline powder. Melting point: 1800 °c     Relative density (water = 1): 1.5 g/cm3 Solubility: soluble in water, insoluble in alcohol. Hygroscopic. Assay: ≥98%     Uses: used as a crosslinking agent for oil extraction acidification fracturing fluid thickener, water blocking and sectioning agent, and used with polymers.

Appearance: white needle-like crystals. Melting point: 38-42 °C (lit.) Boiling point: 250 °C (lit.) Relative density (water = 1): 0.96 Solubility: soluble in water and ethanol, slightly soluble in hot ether, insoluble in benzene. Assay: ≥99%     Uses: for the production of pesticide pyrethroids, organic peroxides, cyclic musk, polyethylene plastic crosslinkers and polyether rubber.

Appearance: colorless transparent liquid. Melting point: -32 °C Boiling point: 305 °C (lit.) Relative density (water = 1): 0.962 g/mL at 25 °C (lit.) Solubility: soluble in ether and ethanol, insoluble in water. Assay: ≥99%     Uses: used as plasticizers, special solvents, etc., used as solvents, also used in organic synthesis.

Appearance: yellow powder. Melting point: 220-225°C (dec.)(lit.) Boiling point: 217.08 °C (rough estimate) Relative density (water = 1): 1.65 Assay: ≥98%     Uses: Widely used in polyvinyl chloride, polyethylene, polypropylene, ABS resin and rubber foaming

Appearance: white powder. Melting point: 285-287 °C     Relative density (water = 1): 0.95 Assay: ≥98%     Uses: It is an important intermediate.

Appearance: transparent liquid. Melting point: 5 °c Boiling point: 144°C10mm Hg(lit.) Relative density (water = 1): 1.291g/mLat 25°C (lit.) Assay: ≥98%     Uses: used as intermediates for the synthesis of pharmaceuticals or pesticides, doxazosin synthesis.

Appearance: Liquid. Melting point: -7.15°C (estimate) Boiling point: 193 °C (lit.) Relative density (water = 1): 0.86 g/mL at 25 °C (lit.) Assay: ≥99%     Uses: for the production of polyamide plastics, films and fibers.

Appearance: white crystals. Melting point: 191-195°C Boiling point: 187.6°C at 760 mmHg Relative density (water = 1): 1.42g/cm3 at 20°C Assay: ≥98%     Uses: catalyst; Zirconium metal scymbal, raw material of zirconium tetra β-diketone zirconium liquid crystal material.

Appearance: colorless crystal. Melting point: 114-116°C (lit.) Boiling point: 246 °C Relative density (water = 1): 0.67 g/cm3 Solubility: insoluble in water, soluble in alkali solution, organic solvent. Assay: ≥98%     Uses: It is a broad-spectrum antibacterial agent that can be used to control bacteria, algae, fungi and viruses.